Featured with high resistance value and small size, metal glaze resistor endures good performance and good overload capability in high temperature, high voltage and moisture conditions.
Metal glaze resistor is an electronic component that is designed to provide a fixed resistance value in a circuit. It is made by depositing a layer of metal oxide onto a ceramic substrate, which is then coated with a protective layer. Metal glaze resistors are widely used in electronic circuits due to their precision, stability, and low noise.
1. High resistance value.small size. endure high temperature. high voltage good performance cnduring moisture and good overload capability
2. Operating ambient temperature:-55℃~+125℃。
3. Surface is nonflammable. The normal size coats brick red and small size coating is gray white. That add a yellow ring at the behind of the precision color rings to distinguish the resistors types.
4. Resistance tolerance: ±1%, ±2%, ±5%, ±10%
|
Power |
Resistance range |
Dimensions（mm） |
Max. working voltage |
Max. overload voltage |
Max. Pulse voltage |
Max.insulation voltage |
|||
|
L±1 |
D±0.5 |
d±0.05 |
H±1 |
||||||
|
1/4W |
1K~75M |
6.0 |
2.3 |
0.45 |
26.0 |
350V |
700V |
700V |
500V |
|
1/2WS |
1K~75M |
6.0 |
2.3 |
0.45 |
26.0 |
350V |
700V |
700V |
500V |
|
1/2W |
1K~75M |
9.0 |
3.2 |
0.55 |
26.0 |
500V |
1000V |
1000V |
750V |
|
1WS |
1K~75M |
9.0 |
3.2 |
0.55 |
26.0 |
500V |
1000V |
1000V |
750V |
|
1W |
1K~75M |
11.0 |
4.5 |
0.65 |
26.0 |
700V |
1400V |
1400V |
1000V |
|
2WS |
1K~75M |
11.0 |
4.5 |
0.65 |
26.0 |
700V |
1400V |
1400V |
1000V |
|
2W |
1K~75M |
15.0 |
5.0 |
0.70 |
26.0 |
750V |
1500V |
1500V |
1100V |
|
3WS |
1K~75M |
15.0 |
5.0 |
0.70 |
26.0 |
750V |
1500V |
1500V |
1100V |
|
3W |
1K~75M |
24.0 |
8.0 |
0.70 |
26.0 |
800V |
1600V |
1600V |
1200V |
|
5WS |
1K~75M |
24.0 |
8.0 |
0.70 |
26.0 |
800V |
1600V |
1600V |
1200V |
|
Test item |
Test Condition |
Performance |
|
Temperature Coefficient |
Test the resistance value at normal temperature and normal temperature added 100'C. calculate per℃ resistance value change rate. |
±500ppm/℃ |
|
Short time overload |
2.5 X rated voltage or Max. overload voltage (get the lower)for 5 seconds |
△R<±(2%R+0.05Ω) |
|
Pulse overload |
At 4xrated voltage or max. pulse overload voltage (get the Lower) cycle 10000±200 times (second on, seconds off) |
△R≤±(1%R+0.05Ω) |
|
Resistance to soldering hent |
Immerge into the 350±10℃ tin stove for 2-3seeonds |
△R≤±(1%R+0.05Ω) |
|
Solderability |
Immerge into the 245±3 tin stove for 2-3seeonds |
The soldering area in over95% |
|
Temperature cycling |
At-55℃ for 30 min. than at+25'C for 10-15min. then at +275Cfor min then at+25C for 10-15min, total 5cycles. |
△R≤±(1%R+0.05Ω) |
|
Load life in humidity |
Overload rated voltage or Max. working voltage (get the lower）for 1000 hour l1.5 hour on and half-hour off at the 40 ±2℃ and 90-95% relative humidity |
△R≤±(5%R+0.05Ω) |
|
Load life in heat |
Overload rated voltage or Max, working voltage(get the lower) for 1000 hour (1.5hour on and halt-hour off）at the 70±2℃ |
△R≤±(5%R+0.05Ω) |
|
Nonflammability |
Respectively load AC voltage by 5, 10, 16times rated power for 5 minutes |
No visible flame |
One of the main advantages of metal glaze resistors is their high precision. They have a tight tolerance range, meaning that they provide a very precise resistance value. This is important in circuits that require accurate voltage division or current limiting.
Another advantage of metal glaze resistors is their stability over time and temperature. They are designed to have a low temperature coefficient of resistance (TCR), meaning that their resistance value does not change much as temperature changes. This makes them ideal for use in circuits that operate over a wide temperature range.
Metal glaze resistors also have low noise levels. They are designed to have a low voltage coefficient of resistance (VCR), which means that they do not generate much noise or distortion when used in audio circuits.
Xieyuan Electronics is a professional metal glaze resistors manufacturer and supplier in China, offering a wide range of high quality and high performance metal glaze resistors, including through-hole and surface-mount packages, in different sizes and resistance values to worldwide market.
If you are looking to purchase metal glaze resistors in bulk, we're your right choice! We offer generally competitive wholesale price of metal glaze resistors, making them an affordable option when purchasing electronic components in bulk.
